Shenzhen Ruibu Tech Co., Ltd

Proposed for the use of thenight the runway or quasi for daytime and nighttime use precision approachrunway, all must be set the runway lights.
Suggestion:fitting for the runway visual range less than 800 m or so in the daytime underthe condition of minimum standard of running off the runway, should set therunway lights.
location
Therunway edge lights must be along the runway length with the runway centerlineequidistant set on two parallel lines.
Runwayedge lights must be published as a runway used along the edge of the area oralong the distance from the edge of a setting is not more than 3 m.
Suggestion:as the width of the runway area in published more than 60 m, in determining thedistance between the two lines of the runway edge lights should be consideredwhen running properties, the runway lights light distribution characteristicsof lamps and lanterns and other visual AIDS to navigation in the service of therunway.
Runwayedge lights must attend to evenly spacing arrangement, such as instrument,runway lights shall not be greater than 60 m spacing, such as the meter runway,distance between lamp shall not be greater than 100 MB.The track on both sides of the axis of thecorresponding lamp must be located in perpendicular to the axis line.Crossing the track, if the driver can stillprovide enough guidance, side lights available irregular spacing or cancel somelamps and lanterns.
features
Therunway edge lights must be constant variable white hair light, except thefollowing:
A) therunway entrance of cases, the starting point from the runway to move betweenthe runway entrance light within must show red in the approach direction;
B)from takeoff runway began to see, at the end of the runway at the end of the600 m or a third of the runway length (both in its small value) that a lightyellow display.
Runwayedge lights must be in to take off or landing from either direction of thepilot light on to provide all the necessary direction of the guide.When the runway edge circling lamp to provideboot, lamps and lanterns must be on all the azimuth.
Sideof runway lights in the specification on all of the azimuth required from thelevel above to 15 ° Angle must be within the range of the light, the light mustbe strong enough to adapt to a fitting for take off or landing runwayvisibility and the needs of the ambient light conditions.In any case, the light intensity should be atleast 50 CD, only in the absence of light around the airport, the lightintensity can be reduced to not less than 25 CD, in order to avoid make thedriver feel dazzling.