Shenzhen Ruibu Tech Co., Ltd

We must use low intensityobstacle lamp, lamp or high intensityintensity obstacle obstacle lamp or a combination of them to indicate the presence of an object.Using different combinations of differentheight.

Highintensity obstaclelamp is ready to use both in thedaytime or at night. Need to pay attention to ensure its lightswithout causingdiscomfort glare. Design, on thehigh light intensity obstacle lamp positioning and operation guidance materialssee "aerodrome design manual" article

The four part.

Recommendations-- not too big high objects using A type or B typelow intensity obstacle lights around the ground less than 45 of Mlighting.

Recommendations-- maybe using A type orB type low intensity obstacle lights or lack of need to advance a specialwarning place, should use light intensity or high intensityobstacle lamp. In the more important occasions the need to improve grade than aircraft, vehicles and mobile object must be of type C low intensity obstacle lamp.

In the "followme" the vehicle must be set to D type low intensityobstacle lamp.

Recommend -B -low intensity obstacle lights should be used alone or in accordance with the light intensity of 6.3.7 and B type ofobstacle lamp used in combination.

Recommendations -- largeor highintensityobstacles.Application of Atype and B type or C type ground around more than 45 m in the lighting lampshall be. Light barrier lamp A type and C type should beused alone,while the intensityof B type of obstacle lights should be used alone or in combination with low light intensity obstacle lamptype B.

Note: a group of trees or buildings are regarded as a large object.

Recommendations -- higher than the surrounding ground is greater than 150 m objects by theaeronautical researchshowed thatapplication of Atype high intensity must be obstacles in the daytime recognized with highintensity lighting lamp obstacle lights to indicateits existence. (not installed high intensity A type lamps are marked)