Are you here：Home - News - Industry NewsIndustry News
Heliport visual navigation light setting specifications
Time:2014-07-28Source:深圳市锐步科技有限公司Views:1909Print
1. the heliport visual navigation light setting place and scope
According to the convention on international civil aviation organization (ICAO) annex 10 4 specification requirements, the buildings (high top floor) for fire fighting, emergency landing helicopter medical building such as public security and traffic facilities - elevated helipads visual navigation lights and signs should be set up.
Second, according to the MH - 5013-2008
Size: 1. The airport for the use of level 1 performance helicopter, the size should be the final approach and take-off, as stated in the helicopter flight manuals to determine, in the absence of regulation width, the width shall not be less than 1.5 D, water helicopter field should also be increased by 10%;For the use of level 2, level 3 performance helicopter, the final approach and take-off area should be able to contain a circle diameter of not less than 1.5 D, helipad for water should be able to contain a circle diameter of not less than 2.0 D.
2. The helicopter field must be set at least one indicator.The location of the vane shall meet the following requirements:
A) gauge must be able to indicate wind over the approach and departure area, without being near objects or helicopter rotor down wash flow (next blowing air).
B) in the flight, hovering, and in the area of the helicopter must be able to see an indicator.
C) gauge must be able to clearly indicates the direction of the wind, wind speed and general instructions.
3. The aiming point marks: when a helicopter before into the ground and from the region, it is necessary to approach to a specific location, should be aimed at the heliport setting light marks.Aiming point symbol should be located in the final approach and take-off area, is an equilateral triangle, one of the Angle bisector is consistent with the main approach direction.Logo should be used in continuous white line, triangle side length not less than 9 m, line width 1 m.
4. The heliport logo should be white letters "H" said.The size of the logo should not less than 3 metres.
5. The final approach and take-off area lights: surface heliport for use at night, you must set up the final approach and take-off area light;But when the final approach and take-off area and grounding and away from the region almost overlap or the scope of the apparent, facility.Lamps and lanterns must be uniform along the edge of the final approach and take-off Settings.Such as the area of a square or rectangle, the interval of the lamp shall not be greater than 5 m, each side should be set of not less than four lights (including light) on each corner;Such as the area for other shape (including circular), the interval of lamp shall not be greater than 5 m, at least 10 lamp should be set up.Final approach and take-off area should be constant omnidirectional light white light.
: 6. Aim for light for night heliport, if provided aiming point mark, should be set aim at light.Aiming at lamps must be with the aiming point mark.Should use all white lights, targeting light should be set at least 6.When run will endanger the helicopter on the surface of the above, embedded lights must be used.
7. Grounding area boundary light from the earth: earth and from the region boundary lamp must the line or in the area along the ground and from no more than 1.5 M from the edges of setting for the surface within the scope of the helicopter, the interval shall not be greater than 5 M.For elevated helicopters and helicopter deck, the interval shall not be greater than 3 m.On each side (including each corner lamp) should be set at least four lights.Grounding and from areas for circular and lights along the peripheral uniform arrangement, should be set at least 14 lights.
According to the convention on international civil aviation organization (ICAO) annex 10 4 specification requirements, the buildings (high top floor) for fire fighting, emergency landing helicopter medical building such as public security and traffic facilities - elevated helipads visual navigation lights and signs should be set up.
Second, according to the MH - 5013-2008
Size: 1. The airport for the use of level 1 performance helicopter, the size should be the final approach and take-off, as stated in the helicopter flight manuals to determine, in the absence of regulation width, the width shall not be less than 1.5 D, water helicopter field should also be increased by 10%;For the use of level 2, level 3 performance helicopter, the final approach and take-off area should be able to contain a circle diameter of not less than 1.5 D, helipad for water should be able to contain a circle diameter of not less than 2.0 D.
2. The helicopter field must be set at least one indicator.The location of the vane shall meet the following requirements:
A) gauge must be able to indicate wind over the approach and departure area, without being near objects or helicopter rotor down wash flow (next blowing air).
B) in the flight, hovering, and in the area of the helicopter must be able to see an indicator.
C) gauge must be able to clearly indicates the direction of the wind, wind speed and general instructions.
3. The aiming point marks: when a helicopter before into the ground and from the region, it is necessary to approach to a specific location, should be aimed at the heliport setting light marks.Aiming point symbol should be located in the final approach and take-off area, is an equilateral triangle, one of the Angle bisector is consistent with the main approach direction.Logo should be used in continuous white line, triangle side length not less than 9 m, line width 1 m.
4. The heliport logo should be white letters "H" said.The size of the logo should not less than 3 metres.
5. The final approach and take-off area lights: surface heliport for use at night, you must set up the final approach and take-off area light;But when the final approach and take-off area and grounding and away from the region almost overlap or the scope of the apparent, facility.Lamps and lanterns must be uniform along the edge of the final approach and take-off Settings.Such as the area of a square or rectangle, the interval of the lamp shall not be greater than 5 m, each side should be set of not less than four lights (including light) on each corner;Such as the area for other shape (including circular), the interval of lamp shall not be greater than 5 m, at least 10 lamp should be set up.Final approach and take-off area should be constant omnidirectional light white light.
: 6. Aim for light for night heliport, if provided aiming point mark, should be set aim at light.Aiming at lamps must be with the aiming point mark.Should use all white lights, targeting light should be set at least 6.When run will endanger the helicopter on the surface of the above, embedded lights must be used.
7. Grounding area boundary light from the earth: earth and from the region boundary lamp must the line or in the area along the ground and from no more than 1.5 M from the edges of setting for the surface within the scope of the helicopter, the interval shall not be greater than 5 M.For elevated helicopters and helicopter deck, the interval shall not be greater than 3 m.On each side (including each corner lamp) should be set at least four lights.Grounding and from areas for circular and lights along the peripheral uniform arrangement, should be set at least 14 lights.
This tag:helipads visual navigation lights
