Shenzhen Ruibu Tech Co., Ltd

Groundingand away from the area of edge lights must be uniform Settings, for elevatedhelicopters and helicopter deck, the spacing is not more than 3 m, heliport onsurface, the spacing is not more than 5 m.Each side must be atleast 4 lamps, including lamp on each corner.
Elevatedheliport or stationary helicopter grounded on deck and away from the area edgelights, must be installed to make the driver can't from earth and from the areabelow the level seen in the form of light.
Floatinggrounded helicopter deck and away from the area edge lights, must be installedcorrectly the helicopter deck level when the driver can't from earth and fromthe area below the level seen in the form of light.
Helicopterground surface if set point lights lighting sector array or plate to identifygrounding and away from the area, must be along the ground and from the area ofthe side mark set.When the grounding andaway from the area is circular, they must be located in the region around thestraight line segment.
Groundingon the surface of helicopter field, and from the region must be the minimumquantity of hair plate 9, a form of hair length of the board shall not be lessthan 50% of the forms of length.Groundingand away from the area of each side of the plate must be an odd number and forat least three boards, including one on each corner boards, hair plate must beevenly set in ground and from every side, the distance between the adjacentplate end is not more than 5 m.
Thelocation of the ground and away from the area omni setting must make the pilotin flight or on the staff do not feel dazzling.Omniarrangement and direction must be made to minimize shadows.