Are you here：Home - News - Industry NewsIndustry News
Vertical lamps and lanterns installation notes at the airport
Time:2014-12-01Source:深圳市锐步科技有限公司Views:1677Print
The installation of lamps and lanterns should be according to the requirement of the design documents, determine the towards of lamps and lanterns, light color, and easy to fold.
Before and after the installation, should the position of lamps and lanterns of lamps and lanterns of reiteration, recorded, and shall meet the requirements:
The lamps and lanterns of line should have straight, no obvious visual deviation.
Turning on the lamps and lanterns should be able to show the design to determine turning trajectory, vertical lamps and lanterns is not significantly deviate from the center line.
Lamps and lanterns, equipment, the base of the road shoulder when installation should be installed in the concrete, shall be installed with the elevation of the highest point as a benchmark, galvanized washer, is used to adjust levels, in the top hole position with level measurement, bubbles should be centered.
Lamps and lanterns, the base of the equipment on the surface to shop or block when installation, must be based around the base and the base of earthwork compaction, the compaction should reach ChangDao design requirements.According to the requirements of design, size and depth of concrete foundation, foundation should be level, surface elevation should meet the design requirements.
The installation height of lamps and lanterns must make light center height meets the requirement of design documents.
Must according to the requirement of the design documents and the characteristics of lamps and lanterns vertical direction and horizontal direction of the light Angle adjustment.Especially the symmetry in the runway centerline and extension cord on both sides of the lamps and lanterns, its Angle value should accord with the requirement of relevant specification.
Before and after the installation, should the position of lamps and lanterns of lamps and lanterns of reiteration, recorded, and shall meet the requirements:
The lamps and lanterns of line should have straight, no obvious visual deviation.
Turning on the lamps and lanterns should be able to show the design to determine turning trajectory, vertical lamps and lanterns is not significantly deviate from the center line.
Lamps and lanterns, equipment, the base of the road shoulder when installation should be installed in the concrete, shall be installed with the elevation of the highest point as a benchmark, galvanized washer, is used to adjust levels, in the top hole position with level measurement, bubbles should be centered.
Lamps and lanterns, the base of the equipment on the surface to shop or block when installation, must be based around the base and the base of earthwork compaction, the compaction should reach ChangDao design requirements.According to the requirements of design, size and depth of concrete foundation, foundation should be level, surface elevation should meet the design requirements.
The installation height of lamps and lanterns must make light center height meets the requirement of design documents.
Must according to the requirement of the design documents and the characteristics of lamps and lanterns vertical direction and horizontal direction of the light Angle adjustment.Especially the symmetry in the runway centerline and extension cord on both sides of the lamps and lanterns, its Angle value should accord with the requirement of relevant specification.
This tag:Vertical lamps
