Are you here:HomeProducts - Aviation obstruction lighting - Lighting controllerLighting controller

ZH-879AC/T obstacle lights indoor controller

Product Overview:
Indoor controller ZH-879AC/L aviation obstacle lights, suitable for control of the company of the series of aviation obstacle lights flash sync tasks and monitoring working state. This product is indoor, protection class IP43, only suitable for use in outdoor environment. Required with the use of RB-807G optical probe of the company.

Product introduction:
Indoor controller ZH-879AC/L aviation obstacle lights, suitable for control of the company of the series of aviation obstacle lights flash sync tasks and monitoring working state. This product is indoor, protection class IP43, only suitable for use in outdoor environment. Required with the use of RB-807G optical probe of the company.


Product description:
● adopt steel shell spray treatment, corrosion resistance, anti UV.
Signal voltage control and power line directly using the, line is simple, high reliability, damage will not wrong wiring way short of causing lamps and controller
The control circuit adopts MCU to control, can simultaneously control the load power station /60 2000W within the aviation obstacle lights blinking and bright
● controller with automatic, manual, closed three working modes:
Automatic mode: automatically shut down during the day, close the air light output control, night automatically boot, control output open air light;
Work in manual mode: working state is forced open.
Work off mode: forced closed, three kinds of work mode can be switched by the user.
This controller can also customize the fault alarm function, when a lamp control failure, the controller can be displayed on the indicating lamp, also can be in dry contact external alarm.
The function of the aviation obstacle light controller, powerful, safe and reliable performance, simple, easy to use and maintenance; with anti surge device (anti lightning In 15KA/5, Imax 40KA), suitable for harsh working environment.


The product model:
● ZH-879AC/T: synchronous controller, synchronous control is only applicable to the lamp, not including monitoring function, need to use with RB-807G optical probe of the company.
● ZH-879AC/TP:GPS synchronous controller, with a light operated switch and the GPS control module, suitable for between the floor and Pu line difficulties, but also requires synchronization work site, to realize the synchronization control scheme overall architectural complex, but also to the overall landscape and landscape effect.
● ZH-879AC/TJ: monitoring function of synchronous controller, suitable for the use of the need for monitoring the working state, need to use with RB-807G optical probe of the company.