Shenzhen Ruibu Tech Co., Ltd

Ready to use at night everyairport, needs in the running situations you must set up the airport light orlight.Determine the operationrequirements of must consider the use of the airport air freight businessrequirements, the characteristics of the airport and its surroundingenvironment contrast clearly and help determine the airport location othervisual and non visual AIDS to navigation Settings and other factors.
Theairport light
Readyto use the airport at night if there is one or more of the following conditionsmust be set when the airport light:
A)aircraft flight in visual way;
B)often appear low visibility;or
C) dueto ambient light or the terrain is difficult to locate the airport from the air.
Airportlight must be located in the airport or airport in neighboring environmentbackground brightness is low.Suggestion:the position of the light should choose to make it not covered by the object onthe important direction, and to approach the landing of the pilot does notproduce glare.
Airportlight must display color alternating with white flash or show only the whiteflash.The total flashfrequency must be for 20 to 30 times per minute.In theairport using colored flash, land coloured flash must be for the green lightfrom the water from the airport light colored flash must be yellow.If use colored flash amphibious airport, mustaccording to which part of the airport is a major facility to determine thecolor of the flash.
Lightemitted by the light must be all azimuth can see.The verticaldistribution of lamplight must never greater than 1 DHS scaling up of theelevation Angle to be determined by the authorities of enough in ready to useon the maximum elevation of light guide elevation.At the same time effective flash light intensitymust not be less than 2, 000 CD.