Shenzhen Ruibu Tech Co., Ltd

Sign position of the track mustbe waiting for the holding point of runway shows.
In with the meter runway, taxiway precisionapproach runway or takeoff runway intersect, logo must be in accordance withthe relevant laws and regulations of the holding point of runway specificationsshown in Settings.
On thetaxiway and Ⅰ, Ⅱ classes or Ⅲ precision approach the runway intersect as only has a waitingposition, it must sign the holding point of runway related laws and regulationsof the specification shown in Settings.In theintersect, such as the holding point of runway is equipped with two or three,the holding point of runway is closest to the runway marks must be shown inrelevant laws and regulations standard setting, the holding point of runway andthe rest of the far away from the track marks must be shown in relevant lawsand regulations standard Settings.
Accordingto relevant laws and regulations standard set by the position on the runwaywaiting for runway logo must be according to relevant laws and regulations tostandardize the shown in Settings.
Suggestion:the need to make the logo more apparent in the holding point of runway, type Aor type B should sign the holding point of runway according to relevant lawsand regulations standard shown in Settings.
Suggested:such as type B sign the holding point of runway in a length greater than 60 m,should according to the category of runway will "CAT Ⅱ"or "CAT.
Ⅲ "logo on the runway waiting position marked at both ends andspacing is not more than 45 m each point on the ground. The letter heightshould not be less than 1.8 m, and should be located on the sign outside theholding point of runway is not more than 0.9 m.